Operation Manual

Allow for sufficient heat dispersion when installed on a rack.

Do not obstruct the ventilation holes. (For units with ventilation

Handle the power cord carefully. holes)

Hold the plug when unplugging the cord. Do not drop foreign objects into the unit.

Keep the appliance free from moisture, water, and dust. Do not let insecticides, benzene, and thinner come in contact with the

set.

Unplug the power cord when not using the appliance for long periods

of time. Never disassemble or modify the set in any way.

NOTE ON USAGE

FEATURES

1. Checking the Contents

Check that the carton contains the following items: CAUTION: The player will work normally when the main unit is

1) Main unit mounted with the front panel at within 15 degrees of the vertical

2) Control unit plane. If the unit is tilted excessively, discs may not be loaded or

3) Operating instruction (this booklet) unloaded properly.

4) Pair of RCA pin cord.

5) Control cords The control panel's LCD's are designed to be clearly visible within the

angles shown in Figure 2. Mount the control unit so that the visual

angle is within this range.

2. Installing the Unit

Mount the unit into your console or rack with 19" EIA rack rails.

PREPARATIONS

Connections CAUTION:

1) Turn off the POWER switch. Be sure to use the supplied control cords. Using another type of

2) Connect the RCA pin cord to the input on your mixer. cable may result in damage.

3) Connect the control cords to the REMOTE connector on Be sure the power is off when connecting the control cords.

the main unit. Otherwise the units may not work properly.

english

Insert draw Insert draw

8 times over sampling 1 bit D/A converter

10 number buttons for direct track access

Instant start within 10 msec (sound is produced immediately when

the PLAY button is pressed) 30 programable tracks

Seamless Loop (uninterrupted loop playback) 10 cue points can be memorized

Auto cue Digital output RCA coaxial

Realtime cue Relay playback (using the control jack)

Frame search

4 different speed scan Large bright LCD Screen can be viewed from wide angles

The BPM adjustment range with the pitch slider can be set to +/-8%, 60 seconds transport protection

+/-12%, +/-16%

Auto protection (after 15 minutes with no operating in pause mode,

Pitch display the laser diode will be turned off)

Beat Counter

cdj 903 cdj 907

Figure 2