Operation Manual

3
PART NAMES AND FUNCTIONS
cdj 907
cdj 907
CONTROL UNIT
CDJ 907
BEAT BEAT
BPM BPM
TRACK TRACK
LOOPSEAMLESS LOOPSEAMLESS
CDJ 907
SCANSEARCH SCANSEARCH
COUNTER COUNTER
PITCH
BEND
PITCH
BEND
OP/CL
T
S
H
U
T
E
L
T
S
H
U
T
E
L
RELAY
CD 1CD 1CD 1 CD 2CD 2CD 2
CD 2CD 2CD 2
OP/CL
CD 1CD 1CD 1
CUE CUE
IN/R.CUE IN/R.CUE
1 1
MEMORY MEMORY
2 2
7 76 6
3 3
8 8
4 4
9 9
5 5
0 0
RECALL RECALL
OUT/EXIT OUT/EXITRELOOP RELOOP
PROG. PROG.PITCH PITCH
0 %0 %
++
--
S GL /CT N
TIME TIME
S GL /CT N
21
2019
22
8 9 10
1211
1 2
3
4
5
6 7
18
17
1615
14
13
1.Memory Button:This button is used to saved the CD current position to the playing but either paused or set to a cue point. To set a new frame cue point,
cue memory. You can memorize up to 10 cue points. To erase all the cue spin the wheel then press PLAY when you have determined the proper
memory hold the MEMORY button down for more than 2 seconds till the cue position. Press CUE to return to the “CUE POINT”.
memory indicators on the LCD display are off. b.The jog wheel temporarily bend the pitch of the music up to +/-16% if the
song is already playing by rotating the wheel clockwise to speed up or
counterclockwise to slow down. The amount of pitch change is determined by
2.Time Button: The TIME button switches among Elapsed playing time,
the speed of rotation
Remaining time in a selection, Total remaining time of the disc.
3.SGL/CTN: You can choose between a single track to play or all tracks in
order by pressing once or twice.
4.LCD Display: Indicates all the functions, as they are occurring with the CD.
5.Recall Button: This button allows you to cue up any of the 10 memory CUE
points that have been memorized. The player will cue up the selected point
when RECALL button is pressed.
6.Track Numerical Butons: These buttons serve 2 functions depending on
the MEMORY and RECALL LEDs you are working in.
a.The numerical buttons are for quickly advancing to the track on a CD while
both MEMORY and RECALL LEDs are off.
b.The numerical buttons are also for memorizing and recalling the Cue points
7.Pitch Bend +/-16%:The pitch will automatically rise while the + button is
pressed and return to the original pitch when the button is released. The pitch
will automatically drop when the button is pressed and return to the original
pitch when the button is released.
8.Program: Depress this button to stop the CD and enter the program mode.
Note the word “PROGRAM” is indicated on the display. Select each track to
be programmed and press the PROGRAM button between selections. You can
program up to 30 tracks. Press PLAY to start the program. To exit and erase
program hold the PROGRAM button down for mode than 2 seconds while the
unit is stopped
9.Pitch Button: This button activates de Pitch slider(19).
10.Open/Close Disc Tray: Press to load or eject the disc. Each press will open
or close the disc tray on the transport. NOTE: Tray will not open when the disc
is playing
11.Search wheel (Outer ring): This wheel has 4 forward and 4 backward
speed positions for searching through songs. The more you turn the wheel in
either direction the faster you search through the music.
Switches the mode of the display between showing the BPM
12.Jog wheel (Inner ring):This jog wheel serve 2 functions depending on the
and the percentage change in pitch.
mode you are working in.
a.The jog wheel will act as a slow frame search control when the CD is not
13.In/R.Cue: This allows you to set the cue point without stopping the play
back. This button also sets the beginning of a seamless loop.
14.Track: These buttons are used to select the track to be played. Forward
skip & Back skip
15.Out/Exit: Used to set the ending when looping music. The player will start
to loop continuous until you press this button again to exit.
16.Cue: Pressing the CUE button during play provides a return to the position
at which play was started. If pause is used before CUE or CUE point was set,
that will become the cue point. With the unit in the pause mode (Play/Pause
LED blinks) the search and/or jog wheel is used to set a different start point.
By pressing "PLAY/PAUSE" button then "CUE", you can confirm this new
cue point is desirable. The CUE LED will light up since the cue button is
pressed until the CD has returned to the position at which play was started.
17.Reloop Button: If a loop has been made and you have hit the exit button,
press this button to enter the loop again. To exit loop pressing OUT/EXIT
button.
18.Play/Pause: Each press of the PLAY/PAUSE button causes the operation
to change from play to pause or from pause to play.
19.Pitch Slider: The pitch can be changed up to +/-12% by pressing the
PITCH button so the PITCH LED is lit,then moving the sliding fader.
The pitch will not be changed if the PITCH LED is off. If you want to change
the BPM djustment range (+/-8%,+/-12%,+/-16%), press and hold PITCH
button then press the PITCH BEND+ to select
20.Counter Button: Tap this button with the beat of the music to determine
the current Beats Per Minute (BPM).
21.Relay: By pressing the Relay button, the playback automatically switches
to the other player afect every track.
22.BPM Button: