Operation Manual

2
TECHNICAL SPECIFICATIONS
dx turntables
english
TURNTABLE SECTION:
TONEARM SECTION:
Type Static balanced S-shaped tonearm with detachable headshell
Effective Arm Length 230.5mm
Tracking Error Angle Less than 3 degree
Applicable Cartridge Weight 13~18g
Anti-skating Range 0-4g
Output 1.5~3.6mV at 1KHz 5cm/sec
Frequency Response 20Hz-20KHz
Channel Separation More than 15dB
Channel Balance Within 2.5dB at 1KHz
Needle Pressure range 3~4g
High of cue(first track) 6~10.5mm
Descend of cue 1~3sec
GENERAL SECTION:
Power Supply
Power Consumption
Dim ensions
Weight
AC 230V, 50Hz
5.5 Watts (DX-101) / 7 Watts (DX-202)
450 (W) x 370 (D) x 86 (H) mm
4 Kgs (DX-101) / 6.5 Kgs (DX-202)
ACCESSORIES SUPPLIED
Instruction manual x 1,
Headshell x 1, 45 rpm adaptor x 1,
Counter weight x 1, AC cord x 1,
RCA cable x 1, Platter x1
Slipmat x 1, Target light x 1
SPECIFICATIONS
3-speed full manual
DC motor
Belt drive (DX-101)/Direct Drive (DX-202)
330mm dia. Aluminum diecast
33
1
/
3
and 45 rpm and 78 rpm (78 rpm DX-101 only)
Less than 0.2% WRMS (DX-101) / 0.15% WRM (DX-202) with 33
1
/
3
rpm
More than 60dB (DIN-B)
+/- 10%
Less than 1 sec with 33
1
/
3
Less than 1 sec. with 33
1
/
3
Less than 1 sec. from 33
1
/
3
to 45 rpm.
Type
Motor
Driving Method
Turntable Platter
Speeds
Wow and Flutter
S/N Ratio
Pitch Controls
Starting Time
Braking Time
Time for Speed Change
Less than 1 sec. from 45 to 33
1
/
3
rpm.
Less than 1 sec. from 33
1
/
3
to 78 rpm
Starting Torque
More than 1 Kgf.cm (DX-202)
DESCRIPTIONS UNIT NORMAL LIMIT
(1) Outp ut Difference dB 2.3 2.5
(2) Output Level mv 1.7~3.5 1.5~3.6
(3) Speed (Speed Range) +/- 10% Hz 2700/3300 2710/3290
(4) Speed (Center Range) DX-101 Hz 2990~3030 2940~3090
(4) Speed (Center Range) DX-202 Hz 2995~3005 2990~3010
(5) Wow and Flutter % DX-101 0.15 / DX-202 0,13 DX-101 0.2 / DX-202 0,15
(6) Channel separation dB 16 15