Technical Specifications

Data sheets are subject to change without notice. For the latest version, please check the product page at www.tccmaterials.com
Page 2
AKONA
®
EPOXY CRACK REPAIR
• Always test a small amount to insure that the product is
mixed thoroughly and that the material will harden properly
before proceeding.
• Surface and ambient temperature must be 40°F (5°C) or
above.
• For applications with constant high temperature (above 120°
F/49°C), contact TCC Materials.
• Do not expose stored product to cold or freezing temperature
(below 35°F/ 2°C) for any length of time.
Safety
READ THE SAFETY DATA SHEET (SDS) BEFORE USING
THIS PRODUCT. SDS information is available on our website:
tccmaterials.com
Cautions
Read complete cautionary information printed on product
container prior to use.
This Product Data Sheet has been prepared in good faith on
the basis of information available at the time of publication. It is
intended to provide users with information about and guidelines
for the proper use and application of the covered Akona brand
product(s) under normal environmental and working conditions.
Because each project is different, TCC Materials cannot be
responsible for the consequences of variations in such
conditions, or for unforeseen conditions.
6. AVAILABILITY
To locate Akona products in your area, please contact:
Phone: [phone]
Website: tccmaterials.com
7. WARRANTY
Seller warrants that its product will conform to and perform in
accordance with the product specifications. The foregoing
warranty is in lieu of all other warranties, expressed or implied,
including, but not limited to those concerning merchantability
and fitness for a particular purpose. Because of the difficulty in
ascertaining and measuring damages hereunder, it is agreed
that Seller’s liability to the Buyer shall not exceed the total
amount billed and billable to the Buyer for the product
hereunder.
KEEP OUT OF REACH OF CHILDREN
WARNING: INJURIOUS TO EYES
KEEP PRODUCT IN CONTAINER FROM FREEZING
Shelf Life
Best when used within 18 months in
original, unopened container.
Storage Conditions
Store dry, cool (35°F-<95°F/2°C-<35°
C), out of direct sunlight.
Color
Clear to light yellow
Akona
®
is a registered trademark of TCC Materials
2025 Centre Pointe Blvd., Suite 300
Mendota Heights, MN 55120 USA
www.tccmaterials.com
© Copyright 2019 TCC Materials
REV 06.19