User`s manual

5-2.AC Voltage Measurements
Risk of Electrocution. The probe tips may not be long enough to contact the live
parts inside some 240V outlets for appliances because the contacts are recessed deep in the
outlets. As a result, the reading may show 0 volts when the outlet actually has voltage on it.
Make sure the probe tips are touching the metal contacts inside the outlet before assuming
that no voltage is present.
Do not measure AC voltages if a motor on the circuit is being switched ON or
OFF. Large voltage surges may occur that can damage the meter.
1.Set the function switch to the green VAC
position.
2.press the soft key labeled Menu. Move the
menu selector to the menu item labeled VAC.
Press the soft key VAC
3.Insert the black test lead banana plug into
the negative COM jack. Insert red test lead
banana plug into the positive V jack.
4.Read the voltage in the main display
WARNING:
CAUTION:
CAP
Hz %
Temp
10A
mA
μA
Ω
mV
V
OSC
Hz %
HELP
HOLD
MODE
AUTO
REC
HOLD
RANGE
MAX
MIN
ESC
F1 F2
F3
F4
auto
range
0 100 200 300 400 500 VAC
VAC
100.00
8:10pm
06/13/07
VCAPΩ
Hz % Temp
CAT III 600V
DT-9989
Bluetooth
12
True RMS Multimeter
www.tmatlantic.com