User`s manual

5-13.AC Current Measurements
CAUTION: Do not make 10A current measurements for longer than 30 seconds. Exceeding
30 seconds may cause damage to the meter and/or the test leads.
1.Insert the black test lead banana plug into
the negative COM jack.
2.For current measurements up to 5000 A AC,
set the function switch to the yellow A
position and insert the red test lead banana
plug into the A/mA jack.
3.For current measurements up to 500mA AC,
set the function switch to the yellow mA
position and insert the red test lead banana
plug into the A/mA jack.
4.For current measurements up to 20A AC,
set the function switch to the yellow 10A
position and insert the red test lead banana
plug into the 10A jack.
5.Press the soft key labeled Menu. Move the
menu selector to the menu item labeled AC.
Press the soft key AC.
6.Read the current in the display
µ
µ
µ
µ
CAP
Hz %
Temp
10A
mA
μA
Ω
mV
V
OSC
Hz%
HELP
HOLD
MODE
AUTO
REC
HOLD
RANGE
MAX
MIN
ESC
F1 F2
F3
F4
auto
range
0 100 200 300 400 500 AAC
AAC
10.000
8:10pm
06/13/07
V CAPΩ
Hz % Temp
CAT III 600V
DT-9989
Bluetooth
21
True RMS Multimeter
www.tmatlantic.com