Operating instructions

Connections
02
18
En
Using other types of video
output
This recorder has standard (composite), S-
video and component video outputs. The
main difference between them is the quality
of the picture. S-video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
1 Connecting using an S-video output
S-video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-video outputs for connection
to TVs, monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-video input on your TV, monitor (or
other equipment).
2 Connecting using the component
vi
deo output
Component video carries the pictur e as two
separate colour signals, plus a luminance
(brightness) signal.
See also Component Video Out on page 114
for how to set up the component video
output for use with a progressive scan-
compatible TV.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
AC IN
CONTROL
IN
S-VIDEO
VIDEOAUDIO
L
R
ANTENNA
IN
OUT
S-VIDEO
VIDEOAUDIO
L
R
Y
P
B
P R
OUTPUT 1
OUTPUT 2
COMPONENT VIDEO OUT
INPUT 1 / AUTO START REC
INPUT 3
COAXIAL
DIGITAL OUT
LAN(10/100)
HDMI OUT
TV
DVR-660H-K
1
2
S-VIDEO
OUTPUT
COMPONENT
VIDEO OUT
To component
video input
To S-video
input
DVR660HK_KC_EN.book 18 ページ ２００８年２月７日 木曜日 午後２時３４分