Premier AV TV-1108V-SD Mini Scart Freeview Receiver USER’S MANUAL (DIGITAL TERRESTRIAL RECEIVER) English
Index 1. 2. 3. 4. 5. 6. INTRODUCTION.............................................................................1 1.1. Features..................................................................................1 1.2. Safety Information...................................................................1 PRODUCT OVERVIEW...................................................................5 2.1. Main Unit.................................................................................5 2.2.
6.4. 6.3.1. OSD............................................................................14 6.3.2. TV...............................................................................14 6.3.3. System Setup..............................................................15 6.3.4. Time............................................................................15 6.3.5. Wakeup Timer.............................................................16 6.3.6. Parental Lock......................................
1. INTRODUCTION The Premier AV TV-1108V-SD is a Super Mini Set-top box being able to receive all Freeview DVB-T signals (over 100 TV and Radio channels). Plug a Scart shaped device to one of the scart ports of your TV and connect the Aerial/Power plugs to this device and your TV,then it displays initial set-up menu thru your TV so you just can follow to install main features step by step. The hinged device is designed to be fit nicely to even confined space i.e.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Please, carefully study this manual and always keep it available.
(11) GROUNDING OR POLARIZATION: This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).This plug will fit into the power outlet only one way. This is a safety feature .If you are unable to insert the plug fully into the outlet, try reversing the plug .If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
(16) POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
2. PRODUCT OVERVIEW 2.1.
Note : IR Receiver is to be connected as in the above for remote activation 2.2.
TV/RADIO oPR Switch to TV or Radio channels TXT Switch to Teletext mode SUBTITLE Display subtitles Go to previous program MENU Display Main Menu EXIT Exit Current Menu PR+, PR- Changing the channel up/ Press once to pause. down PAUSE Press again to return to normal Adjusting volume FAV Display Favourite list Enter the mode of sample images on the screen . Press this key to start RECORD recording program Activate the selected OK/List option in the menu screen STOP Or enter the option.
3.2 DVB-T Channels Initial Installation Initial Install screen displays when the unit is initially connected to Aerial and power-plugged on. . Once OSD language and Area are selected, press OK/LIST button and select YES on the pop-up window to start scanning DVB-T channels. When completing the channels scanning, DVB-T channels will be scanned.
Press INFO to enter the operation guide menu while the channels list is displayed. 4.2. Favourite List You can organise your own favourite channels lists. (see chapter 6.1. Channel Manager). Press FAV to display the favourite list. Press PR+ or PR- to move and select a channel, and Press OK/LIST to display it. Press TV/RADIO to switch to between TV and radio channels. Press EXIT to close the favourite list. Press INFO to enter the operation guide while the favourite list is displayed. 4.3.
4.4. Soundtrack and Subtitles Selection Press AUDIO to select the audio modes between STEREO, LEFT MONO and RIGHT MONO. Press SUBTITLE to access Subtitle option. 4.5. Displaying Program Information Press INFO to display the current program information and Press the same button again to show frequency, bandwidth, signal and quality levels of the channel. Press INFO once again to close the program information window. 4.6.
6. DIGITAL TV 6.1. Channel Manager Go to Digital TV, select Channel Manager and press OK/LIST to enter. Then you will find the following sub-menus: 6.1.1. Channel Organizer You can organise the Digital TV channels tuned-in. Press PR+ or PR- to select channels. When a channel is selected, Press the RED button to set the channel as the Favourite channel. Press the GREEN buton to delete the channel. Press the YELLOW button to move the channel to a new position in the list.
Select a channel and press -\ or [+ to rename channels. Use the numerical key pad and the coloured buttons to enter new name and press OK/LIST button to confirm and exit. Keep pressing EXIT button until Menu windows are all closed and then the unit is updated with the message “Successfully updated”. 6.1.2. Channel sorting You can sort the channels list based on Area, Alphabetical order, LCN(Logical Channel Number) & ETC. 6.1.3. Channel Grouping You can classify and group the stored channels.
6.1.5. Delete All You can delete all channels lists. Enter the password allocated on the parental lock and then choose to delete TV or Radio channels. (Default password : 0000) 6.2. Installation Go to Digital TV, select Installation and press OK/LIST to enter. Then you will find the following sub-menus: 6.2.1. Auto Search Select Auto Search and press OK/LIST to start scanning channels automatically 6.2.2. Manual Search Select Manual Search and press OK/LIST to enter the manual search submenu.
6.3. Configuration Go to Digital TV, select Configuration and press OK/LIST to enter. Then you will find the following sub-menus: 6.3.1. OSD Select OSD and press OK/LIST to enter the following setting options. OSD: Use the button -\ or [+ to select color shade of the OSD screen Time on OSD: : Use the button -\ or [+ to activate or deactivate the Time Display function (Time will display on the top- right hand corner of the screen on activation mode).
Display Mode: Use the button -\ or [+ to select Video System. Aspect Ratio: Select Screen Aspect Ratio Video Output: Select Video Ouputs (CVBS, RGB outputs). Brightness, Contrast, Hue and Saturation 6.3.3. System Setup Select System setup and press OK/LIST to enter the general settings options. EQ Setup: Adjust the audio equalizer settings. Surround: Use the button -\ or [+ to select the sound’s surrounding effect setting. Active Antenna: OFF is set by default.
6.3.5. Wakeup Timer Select Wakeup Timer and press OK/LIST to enter the scheduler settings Options. ( See chapter 9.1. Timer Recording Function ) 6.3.6. Parental Lock Select parantal Lock and press OK/LIST to enter the channels lock settings options. In this submenu you can set up your own password for channels locking. The password of the Parental Lock is 0000 by default. Input the correct old password twice before creating a new password. 6.4. Software Upgrade Visit www.avsaleseurope.
8. GAMES Go to Main Menu by pressing “MENU” button and select the Games to access available games. Select one you wish to play and press OK/LIST to enter. 9.
Timer Number: Sequence Nos allocated to each Timer-recording assignments Timer Mode: Select options of off, once, daily, weekly & yearly Wakeup Mode: Select options of off, message, channel, on & recorder (Select “recorder” for Timer-recording booking) Wakeup Channel: The channel to be recorded Wakeup Date: The day that Timer Recording be activated. Use the button -\ or [+ to open the calendar and choose the date. On Time: Specific time that Timer Recording be activated.
10. DISK MANAGER Go to Main Menu and then the Disk Manager option. Select the recording content or file and keep pressing the GREEN button until available options will be shown: Delete One, Delete All, Rename and Play. Press select one of the options/ press OK/LIST / YES to confirm action 11.
The remote control unit does not work -> See if the IR lead is connected properly to the device and also check if the red light of the IR eye is permanently on; Aim the remote control unit towards IR eye.;Replace remote controller batteries if they become flat. You have forgotten the channel lock code ->Reinstall the channels to cancel the channel lock.
EPG (Electronic Program Guide) Program information Supported image file format: JPG, BMP USB Supported audio files: MP3, WMA EUP Standard Power Supply Supported video files: MPEG4, DIVX After no activation via remote is made during 3 hours, the unit would be automatically switched off to Stand-by mode AC 100-240V~50/60Hz (DC 5V 1A) power consumption Max power consumption: 3.5W Standby power Standby power 0.5~0.