Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Difference
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.Screen Display Configuration
- 8.Sound and Volume Configuration
- 9.Phone Book Configuration
- 10.Network Setting
- 11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.SIP Account Registration
- 11.4.SIP Server Configuration
- 11.5.Outbound Proxy Server configuration
- 11.6.SIP Call Configuration
- 11.7.Device Local RTP configuration
- 11.8.Data Transmission Type Configuration
- 11.9.Call Setting
- 11.10. Intercom Call Configuration
- 11.11.SIP Hacking Protection
- 11.12.Emergency Call Setting
- 11.13.Multicast Configuration
- 11.14.Call Forwarding Setting
- 12.Intercom Message Setting
- 13.Audio& Video Codec Configuration for SIP Calls
- 14.Security
- 14.1.Monitor and Image
- 14.2.Alarm and Arming Configuration
- 14.2.1.Configure Alarm and Arming on the Device
- 14.2.2.Configure Alarm and Arming on the Web Interface
- 14.2.3.Configure Location-based Alarm on the device scree
- 14.2.4.Configure Location-based Alarm on the Web Interfac
- 14.2.5.Configure Alarm Text
- 14.2.6.Configure Arming mode
- 14.2.7.Alarm Action Configuration
- 14.2.8.Check Alarm Log
- 14.3.Screen Unlock Setting
- 14.4.Client Certificate Setting
- 14.5.Power Output Setting
- 15.Door Access Control Configuration
- 16.Device Integration with Third Party Device
- 17.Firmware Upgrade
- 18. Backup
- 19.Auto-provisioning
- 20.Call Log
- 21.Debug
- 22.Password Modification
- 23.System Reboot&Reset
- 24.Abbreviations
- 25.FAQ
- 26.Contact US
C313W Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
33
10. Network Setting
10.1.Device Network Configuration
You can check for the C313W network connection info and configure the
default DHCP mode (Dynamic Host Configuration Protocol) and static IP
connection for the device either on the device or on the device web interface.
10.1.1. Configuring Network Connection on the Device
To check and configure the network connection on the device screen More >
Setting > Advance > Network.
Parameter Set-up:
Type: select the DHCP mode or Static mode. DHCP mode is the default
network connection. If the DHCP mode is selected, then the door phone
will be assigned by the DHCP server with IP address, subnet mask,
default gateway, and DNS server address automatically. When Static IP