Product Info

C313W Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
40
11. Intercom Call Configuration
11.1.IP call & IP Call Configuration
IP calls can be made directly on the intercom device by entering the IP
number on the device. And you can also disable the direct IP call if you allow
no IP call to be made on the device. To configure the IP call feature and port
on the device web Phone > Call Feature > Others interface.
Parameter Set-up:
 Direct IP Call: tick the check box to enable the direct IP call. For example,
if you do not allow direct IP call to be made on the device, you can untick
the check box to terminate the function.
 Direct IP Call Port: the direct IP Call Port is "5060" by default with the port
range from 1-65535. And you enter any values within the range other
than the 5060, you are required to check if the value entered is consistent
with the corresponding value on the device you wish to establish a data
transmission with.
11.2.SIP Call &SIP Call Configuration
You can make SIP call (Session Initiation Protocol) in the same way as you
do for making the IP calls on the device. However, SIP call parameters related
to its account, server, and transport type need to configured first before you
can make calls on the device.