Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Difference
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.Screen Display Configuration
- 8.Sound and Volume Configuration
- 9.Phone Book Configuration
- 10.Network Setting
- 11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.SIP Account Registration
- 11.4.SIP Server Configuration
- 11.5.Outbound Proxy Server configuration
- 11.6.SIP Call Configuration
- 11.7.Device Local RTP configuration
- 11.8.Data Transmission Type Configuration
- 11.9.Call Setting
- 11.10. Intercom Call Configuration
- 11.11.SIP Hacking Protection
- 11.12.Emergency Call Setting
- 11.13.Multicast Configuration
- 11.14.Call Forwarding Setting
- 12.Intercom Message Setting
- 13.Audio& Video Codec Configuration for SIP Calls
- 14.Security
- 14.1.Monitor and Image
- 14.2.Alarm and Arming Configuration
- 14.2.1.Configure Alarm and Arming on the Device
- 14.2.2.Configure Alarm and Arming on the Web Interface
- 14.2.3.Configure Location-based Alarm on the device scree
- 14.2.4.Configure Location-based Alarm on the Web Interfac
- 14.2.5.Configure Alarm Text
- 14.2.6.Configure Arming mode
- 14.2.7.Alarm Action Configuration
- 14.2.8.Check Alarm Log
- 14.3.Screen Unlock Setting
- 14.4.Client Certificate Setting
- 14.5.Power Output Setting
- 15.Door Access Control Configuration
- 16.Device Integration with Third Party Device
- 17.Firmware Upgrade
- 18. Backup
- 19.Auto-provisioning
- 20.Call Log
- 21.Debug
- 22.Password Modification
- 23.System Reboot&Reset
- 24.Abbreviations
- 25.FAQ
- 26.Contact US
C313W Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
42
Parameter Set-up:
Status: check to see if the SIP account is registered or not.
Account: select Account1 or Account2.
Account Enabled: check to active the registered SIP account.
Display Label: configure the device label to be shown on the device
screen.
Display Name: configure the name, for example, the device’s name to be
shown on the device being called to.
Register Name: enter the SIP account register Name obtained from the
SIP account administrator.
Username: enter the user name obtained from SIP account administrator.
Password: enter the password obtained from the SIP server.
11.4.SIP Server Configuration
SIP server can be set up for device in order to achieve call session through
SIP server between intercom devices. To perform the SIP account setting on
the Web Account > Basic > SIP Server Interface.
Parameter Set-up:
Server IP: enter the Server’s IP address number or its URL.
Port: set up SIP server port for data transmission.