Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsIndoor Monitor

Table Of Contents

1.Product Overview
2.Change Log
3.Model Difference
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Device Start-up Network Selection
- 5.2.Device Home Screen Type Selection
- 5.3.Accessing the Device Setting on the Device
  - 5.3.1.Accessing Device Basic Setting.
  - 5.3.2.Accessing Device Advanced Setting
- 5.4.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Web Interface.
- 6.2.Time Setting
  - 6.2.1.Time Setting on the Device
  - 6.2.2.Time Setting on the Device Web Interface
    - 6.2.2.1.Time Setting on the Device Web Interface
    - 6.2.2.2.Daylight Saving Time Setting
7.Screen Display Configuration
- 7.1.Screen Display setting on the Device
- 7.2.Screen Display Setting on the Web Interface
- 7.3.Screensaver Configuration
- 7.4.Upload Device Booting Image
- 7.5.Upload Web interface logo
- 7.6.Icon Screen Display Configuration
8.Sound and Volume Configuration
- 8.1.Volume Configuration
  - 8.1.1. Configure Volume on the Device
  - 8.1.2.Configure Volume on the Web Interface
9.Phone Book Configuration
- 9.1.Phone Book Configuration on the Device
- 9.2.Phone Book Configuration on the Web Interface
10.Network Setting
- 10.1.Device Network Configuration
  - 10.1.1.Configuring Network Connection on the Device
  - 10.1.2.Configuring Device Network Connection on the Web I
- 10.2.Device Deployment in Network
- 10.3. Device NAT Setting
- 10.4.Device Wi-Fi Setting
- 10.5.VLAN Setting
11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.SIP Account Registration
- 11.4.SIP Server Configuration
- 11.5.Outbound Proxy Server configuration
- 11.6.SIP Call Configuration
- 11.7.Device Local RTP configuration
- 11.8.Data Transmission Type Configuration
- 11.9.Call Setting
  - 11.9.1.Call Auto-answer Configuration
  - 11.9.2.Auto-answer Allow List setting
- 11.10. Intercom Call Configuration
- 11.11.SIP Hacking Protection
- 11.12.Emergency Call Setting
- 11.13.Multicast Configuration
- 11.14.Call Forwarding Setting
  - 11.14.1.Call Forwarding Configuration on the Device
  - 11.14.2.Call Forwarding Configuration on the Web Interface
12.Intercom Message Setting
- 12.1.Manage Text Messages
- 12.2.Manage Voice Message
13.Audio& Video Codec Configuration for SIP Calls
- 13.1.Audio Codec Configuration
- 13.2.Video Codec Configuration
14.Security
- 14.1.Monitor and Image
- 14.2.Alarm and Arming Configuration
- 14.3.Screen Unlock Setting
  - 14.3.1.Screen Unlock by PIN Code
- 14.4.Client Certificate Setting
  - 14.4.1.Web Server Certificate
  - 14.4.2.Client Certificate
- 14.5.Power Output Setting
15.Door Access Control Configuration
- 15.1.Relay Switch Setting
  - 15.1.1.Local Relay Setting
  - 15.1.2.Remote Relay Switch Setting
- 15.2.Web Relay Setting
- 15.3.Door Unlock Configuration
16.Device Integration with Third Party Device
- 16.1.Lift Control
  - 16.1.1.Configure Lift Control
  - 16.1.2.Configure Lift Control Prompt
- 16.2.Smart Living Setting
17.Firmware Upgrade
18. Backup
19.Auto-provisioning
- 19.1.Provisioning Principle
- 19.2.Introduction to the Configuration Files for Auto-P
- 19.3.Autop Schedule
- 19.4.Static Provisioning Configuration
20.Call Log
21.Debug
- 21.1.System Log for Debugging
- 21.2. PCAP for Debugging
22.Password Modification
- 22.1.Modify Device Advanced Setting Password
- 22.2.Modify Device Web Interface Password
23.System Reboot&Reset
- 23.1.Reboot
  - 23.1.1.Reboot on the Device
  - 23.1.2.Reboot on the Web Interface
- 23.2. Reset
  - 23.2.1.Reset on the Device
  - 23.2.2.Reset on the Web Interface
24.Abbreviations
25.FAQ
26.Contact US

C313W Indoor Monitor Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:

 DTMF Code: To set DTMF code for the remote relay, which is “#” by

default.

15.2.Web Relay Setting

In addition to the relay that is connected to indoor monitor, you can also

control the door access using the network-based web relay. To do this

configuration on web Phone > Relay > Web Relay interface.