Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Difference
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Language and Time Setting
- 7.Screen Display Configuration
- 8.Sound and Volume Configuration
- 9.Phone Book Configuration
- 10.Network Setting
- 11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.SIP Account Registration
- 11.4.SIP Server Configuration
- 11.5.Outbound Proxy Server configuration
- 11.6.SIP Call Configuration
- 11.7.Device Local RTP configuration
- 11.8.Data Transmission Type Configuration
- 11.9.Call Setting
- 11.10. Intercom Call Configuration
- 11.11.SIP Hacking Protection
- 11.12.Emergency Call Setting
- 11.13.Multicast Configuration
- 11.14.Call Forwarding Setting
- 12.Intercom Message Setting
- 13.Audio& Video Codec Configuration for SIP Calls
- 14.Security
- 14.1.Monitor and Image
- 14.2.Alarm and Arming Configuration
- 14.2.1.Configure Alarm and Arming on the Device
- 14.2.2.Configure Alarm and Arming on the Web Interface
- 14.2.3.Configure Location-based Alarm on the device scree
- 14.2.4.Configure Location-based Alarm on the Web Interfac
- 14.2.5.Configure Alarm Text
- 14.2.6.Configure Arming mode
- 14.2.7.Alarm Action Configuration
- 14.2.8.Check Alarm Log
- 14.3.Screen Unlock Setting
- 14.4.Client Certificate Setting
- 14.5.Power Output Setting
- 15.Door Access Control Configuration
- 16.Device Integration with Third Party Device
- 17.Firmware Upgrade
- 18. Backup
- 19.Auto-provisioning
- 20.Call Log
- 21.Debug
- 22.Password Modification
- 23.System Reboot&Reset
- 24.Abbreviations
- 25.FAQ
- 26.Contact US
C313W Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
85
16. Device Integration with Third Party
Device
16.1.Lift Control
You can summon lift at home via lift control feature.
16.1.1. Configure Lift Control
To enable and set the display status Lift icon on device web Phone > Lift> Lift
Control interface.
Parameter set-up:
Status: click to enable or disable the lift1 button.
Icon: click to select icon for the button.
Label: enter the title for the button.
HTTP Command: select http:// or https:// for head of http command and
enter http command.