Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsIndoor Monitor

100

Table Of Contents

1.Product Overview
2.Change Log
3.Model Difference
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Device Start-up Network Selection
- 5.2.Device Home Screen Type Selection
- 5.3.Accessing the Device Setting on the Device
  - 5.3.1.Accessing Device Basic Setting.
  - 5.3.2.Accessing Device Advanced Setting
- 5.4.Access the Device Setting on the Web Interface
6.Language and Time Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Web Interface.
- 6.2.Time Setting
  - 6.2.1.Time Setting on the Device
  - 6.2.2.Time Setting on the Device Web Interface
    - 6.2.2.1.Time Setting on the Device Web Interface
    - 6.2.2.2.Daylight Saving Time Setting
7.Screen Display Configuration
- 7.1.Screen Display setting on the Device
- 7.2.Screen Display Setting on the Web Interface
- 7.3.Screensaver Configuration
- 7.4.Upload Device Booting Image
- 7.5.Upload Web interface logo
- 7.6.Icon Screen Display Configuration
8.Sound and Volume Configuration
- 8.1.Volume Configuration
  - 8.1.1. Configure Volume on the Device
  - 8.1.2.Configure Volume on the Web Interface
9.Phone Book Configuration
- 9.1.Phone Book Configuration on the Device
- 9.2.Phone Book Configuration on the Web Interface
10.Network Setting
- 10.1.Device Network Configuration
  - 10.1.1.Configuring Network Connection on the Device
  - 10.1.2.Configuring Device Network Connection on the Web I
- 10.2.Device Deployment in Network
- 10.3. Device NAT Setting
- 10.4.Device Wi-Fi Setting
- 10.5.VLAN Setting
11.Intercom Call Configuration
- 11.1.IP call & IP Call Configuration
- 11.2.SIP Call &SIP Call Configuration
- 11.3.SIP Account Registration
- 11.4.SIP Server Configuration
- 11.5.Outbound Proxy Server configuration
- 11.6.SIP Call Configuration
- 11.7.Device Local RTP configuration
- 11.8.Data Transmission Type Configuration
- 11.9.Call Setting
  - 11.9.1.Call Auto-answer Configuration
  - 11.9.2.Auto-answer Allow List setting
- 11.10. Intercom Call Configuration
- 11.11.SIP Hacking Protection
- 11.12.Emergency Call Setting
- 11.13.Multicast Configuration
- 11.14.Call Forwarding Setting
  - 11.14.1.Call Forwarding Configuration on the Device
  - 11.14.2.Call Forwarding Configuration on the Web Interface
12.Intercom Message Setting
- 12.1.Manage Text Messages
- 12.2.Manage Voice Message
13.Audio& Video Codec Configuration for SIP Calls
- 13.1.Audio Codec Configuration
- 13.2.Video Codec Configuration
14.Security
- 14.1.Monitor and Image
- 14.2.Alarm and Arming Configuration
- 14.3.Screen Unlock Setting
  - 14.3.1.Screen Unlock by PIN Code
- 14.4.Client Certificate Setting
  - 14.4.1.Web Server Certificate
  - 14.4.2.Client Certificate
- 14.5.Power Output Setting
15.Door Access Control Configuration
- 15.1.Relay Switch Setting
  - 15.1.1.Local Relay Setting
  - 15.1.2.Remote Relay Switch Setting
- 15.2.Web Relay Setting
- 15.3.Door Unlock Configuration
16.Device Integration with Third Party Device
- 16.1.Lift Control
  - 16.1.1.Configure Lift Control
  - 16.1.2.Configure Lift Control Prompt
- 16.2.Smart Living Setting
17.Firmware Upgrade
18. Backup
19.Auto-provisioning
- 19.1.Provisioning Principle
- 19.2.Introduction to the Configuration Files for Auto-P
- 19.3.Autop Schedule
- 19.4.Static Provisioning Configuration
20.Call Log
21.Debug
- 21.1.System Log for Debugging
- 21.2. PCAP for Debugging
22.Password Modification
- 22.1.Modify Device Advanced Setting Password
- 22.2.Modify Device Web Interface Password
23.System Reboot&Reset
- 23.1.Reboot
  - 23.1.1.Reboot on the Device
  - 23.1.2.Reboot on the Web Interface
- 23.2. Reset
  - 23.2.1.Reset on the Device
  - 23.2.2.Reset on the Web Interface
24.Abbreviations
25.FAQ
26.Contact US

C313W Indoor Monitor Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

16.1.2. Configure Lift Control Prompt

When the lift controller receives the HTTP command, it will feedback the

current lift status with a prompt. To do this configuration on web Phone >

Lift> Hints interface. Edit the HTTP Status Code, feedback code from Lift

control board.

If there are huge amounts of prompts need to be add, you can click Export

tab to export a template, after editing to import/export.

16.2.Smart Living Setting

You can control the home sensor through HTTP command on device web

interface Phone > Smart Living.