User's Manual


12
C315W
User Manual
 The Status the corresponding zone means whether the zone is
available or not.
 Press Save in the top right corner to save the modification.
2.5.2. Disarm Code
Go to the path Arming - Disarm Code to enter the disarm code
settings interface. Users can modify the disarm code here.
 Enter the original disarm code ① first, it is 0000 as default.
 Enter the new disarm code ②.
 Enter the new disarm code again ③ for confirming.
 Press Save to save the modification.
Figure 2.5.2-1 Disarm code