Product Info

X933/C319 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
114
Parameter Set-up
 Language Type: select the language according to your need.
 Recognition Sensitivity: adjust the voice assistance recognition
sensitivity among "Low", " Normal" and " High" according to your need.
 Talk Mode: move the toggle switch to the right if you want to enable the
the talk mode. When the Talk mode is enabled, voice assistant will stay
on to receive your voice commands during a time span of 30 seconds
without your needing to call " Albert" again to wake up the voice
assistant., while if you disable it, the voice assistant will be wake up
again for each voice command.
 Not Disturb At Night: move the toggle switch to the left to enable the
function. This function is applied when you want the voice assistant to
stay silent while carrying out what it is made to do according to your
voice commands.
 Supported Command: enable or disable the 22 voice commands
according to your need.
Please see the voice command details below:
N
O
Voice
Command
Description
Voice Prompt
1
Intruder
mode off
Use it when you want to
clear the arming mode
when the arming alarm is
triggered. (you are
required to enter the
disarm password in the
pop-out window initiated
by the voice assistant)
Please Input Password
2
Clear
arming
ibid
ibid
3
night mode
Use it when you want to
change the arming mode
to night mode
 Started it, sweet
dreams!