Product Info

X933/C319 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
121
Parameter Set-up:
 Log Level: select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is “3”.the higher the level is, the
more complete the log is.
 Export Log: click the Export tab to export temporary debug log file to a
local PC.
 Export Debug Log: click the Export tab to export debug log file to a local
PC.
 Remote System Log: select “Enable” or “ Disable” if you wan to enable or
disable the remote system log.
 Remote System Server: enter the remote server address to receive the
the device And the remote server address will be provide by Akuvox
technical support.
22.2. PCAP for Debugging
PCAP in Akuvox indoor monitor is used to capture the data package going in
and out of the devices for debugging and troubleshooting purpose. You can
set up the PCAP on the device web Upgrade > Advanced > PCAP interface
properly before using it.