Product Info

X933/C319 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
49
10.2.Device Deployment in Network
Akuvox X933/C319 series indoor monitors should be deployed before they
can be properly configured in the network environment in terms of their
location, operation mode, address and extension numbers as opposed to
other devices for device control and the convenience of the management. To
deploy the device in the network on web Network > Advanced > Connect
Setting interface.
Parameter Set-up:
 Connect Mode: It is automatically set up according to the actual device
connection with a specific server in the network such as SDMC or Cloud
and None. None is the default factory setting indicating the device is not
in any server type, therefore you are allowed to choose Cloud, SDMC in
discovery mode.
 Discovery Mode: check to turn on the discovery mode of the device so
that it can be discovered by other devices in the network, and uncheck if
you want to conceal the device so as not to be discovered by other
devices.
 Device Node: specify the device address by entering device location info
from the left to the right: Community, Unit, Stair, Floor, Room in sequence.
 Device extension: enter the device extension number for the device you
installed.