User's Manual

 19
touseDTMFcodetoremoteunlock.
 Type:Connectwebrelayandchoosethetype.
 IPAddress:EnterwebrelayIPaddress.
 User name: it is an authentication for connecting web
relay
 password: it is an authentication for connecting web
relay
Note:Userscanmodifyusernameand
passwordin webrelay
website.
Input There is a sensor that used to anti vandal in R26X. When
R26X is broken by violent means. The sensor will be
triggered,thenmanagementcenterwillreceivethealarm.
 Service:Enablebydefault
 Call Number: To setup management center number for
alarm.
 Display Name: Which is
 sent to the other call party for
displaying
 Call Timer: Theintervalfor calling.For instant , the Call
timer is 5sec, if you hang up the calling in the third
second,thecallingwillautocalloutafter2sec.
 Light Status: The status will change according to
the
sensor. Once the sensor is triggered , the status will
showWarning.Normalbydefault.










