User Guide

10
E11R
Admin Guide
3.3.4. Chime bell
The chime bell is used to amplify the ringtone volume and help
users not miss the call.
Go to Web-Intercom-Basic-Chime Bell to configure it.
Choose Relay A or Relay B then when the relay is triggered, the bell
will ring with the call established for better sound amplification.
3.4. Intercom Call
3.4.1. Direct IP Call
Go to Phone - Call Feature to enable the direct IP call for door
phones first.
Then, go to Intercom - Basic to configure the IP address of the
destination(E.g. IP address 192.168.1.100). It supports up to 8 lines
simultaneously.
Figure 3.4.1-1 Direct IP call
Figure 3.4.1-2 Push Button Number
Figure 3.3.4-Chime bell