User Guide

20
E11R
Admin Guide
Go to Intercom - Relay to configure.
Switch: Enable this function. Disable by default.
UserName&Password: Users can setup the username and
password for HTTP unlock.
URL format:
http://IP_address/fcgi/do?action=OpenDoor&UserName=&Pas
sword=&DoorNum=1.
3.6.5. Unlock via Exit Button
Go to Intercom - Input to configure input settings.
E11R supports two input triggers “Input A/B(DOOR A/B).”
Input Service:To enable or disable input trigger service.
Trigger Option:To choose open circuit trigger or closed circuit
trigger.“Low” means that connection between door terminal and
GND isclosed, while “High” means the connection is opened.
Door status: To show the status of input signal.
Figure 3.6.4 Unlock via HTTP command
Figure 3.6.5 Unlock via exit button