Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
13
5.5.2.Upload Open Door Tone
You can upload the Open-Door Tone on the device web interface.To
configure the configuration on web Device > Voice > Open Door Tone Setting
interface.
5.5.3. Configure Door Access Prompt Text
You can enable or disable the door access prompt to be shown on the
access control terminal screen for door open failure and success. To
configure the configuration on web Setting > Door > Open Door Succeeded
Text Prompt interface.
Parameter set-up:
Open Door Success: tick the check box if you want to see the text prompt
after the door open success and vice versa.
Open Door Failed: tick the check box if you want to see the prompt words
after the door open failure and vice versa.