Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
21
Parameter Set-up:
Enable Outbound: go to “Enable” and “Disable” to turn on or turn off the
outbound proxy server.
Server IP: enter the SIP address of the outbound proxy server.
Port: enter the Port number for establish call session via the outbound
proxy server
Backup Server IP: set up Backup Server IP for the back up outbound
proxy server.
Port: enter the Port number for establish call session via the backup
outbound proxy server.
7.2.4. Configure Data Transmission Type
SIP message can be transmitted in three data transmission protocols: UDP
(User Datagram Protocol), TCP(Transmission Control Protocol),TLS
(Transport Layer Security) and DNS-SRV. In the meantime, you can also
identify the server from which the data come from. To do the configuration ,
you can go to Account > Basic > Transport Type.
Parameter Set-up: