Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
23
Auto Answer Mode: set up the “Video” or “ Audio mode” you preferred for
the automatic call answering.
7.4. Call Settings
7.4.1.Maximum Call Duration Setting
E16C door phone allows you to set up the call time duration in receiving the
call from the calling device as the caller side might forget to hang up the
phone. When the call time duration is reached, the door phone will terminate
the call automatically. To do the configuration, you can go to Intercom > Call
Feature > Max Call Time.
Parameter Set-up:
Max Call Time: enter the call time duration according to your need
(Ranging from 2-30 min.). The default call time duration is 5 min.
7.4.2.Maximum Dial Duration Setting
Maximum Dial duration is consisted of Maximum dial-in time duration and
the maximum dial-out time. Maximum dial in time refers to the maximum
time duration before the door phone hang up the call if the call is not
answered by the door phone. In contrary, Maximum dial-out time refers to
the maximum time duration before the door phone hang up itself
automatically when the call from the door phone is not answered by the
intercom device being called to. To do the configuration, you can go to
Intercom > Call Feature> Max Dial Time.