Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
40
10.2.2.2. Configure Facial Recognition on Web Interface
To configure the configuration on web Access Control > User interface.
Parameter Set-up:
Status: It will show “Registered” when the picture uploaded conforms to
the format and standard otherwise it would show “ Unregistered” as the
default. However, the status will be changed back to “Unregistered” if the
picture uploaded is cleared when you press the Reset tab.
Photo(jpg/png): select the picture with jpg or png format to be uploaded
to the device and press if you want to clear the picture uploaded.