Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
42
10.4.1. Unlock by QR Code
QR code is another option for door access. If you want to apply QR code
access, you need to enable the QR code function. To enable the QR code
function , you can go to Access Control > Relay > Open Relay via QR Code.
Note:
The function should work with Akuvox SmartPlus. For more
information, please contact Akuvox technical support.
10.4.2. Unlock by Bluetooth
You can also gain the door access by mobile phone with Bluetooth which is
used together with Akuvox SmartPlus. You can shake the mobile phone
closer to the access control terminal for the door access. To configure the
configuration on web Access Control > BLE > BLE interface.