Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
45
Parameter Set-up:
Trigger Electrical Level: select the trigger electrical level options between
“High” and “Low” according the actual operation on the exit button.
Execute Relay: set up relays to be triggered by the input.
Door Status: display the status of input signal.
10.4.5. Unlock by Reception Tab
In the device home screen, E16C door phone provide residents and visitors a
quick door access by pressing the Reception tab on the bottom of the home
screen.To do the configuration, you can go to Intercom > Basic > Key Setting.
Parameter Set-up:
Reception Enabled: tick the check box to enable the function.
Name: enter the name for the Reception icon on the home screen.