Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
52
Port: enter the port number from which the email is sent out.
SMTP user name: enter the SMTP user name, which is usually the same
with sender’s email address.
SMTP password:configure the password of SMTP service, which is same
with sender’s email address.
Email subject: enter the subject of the email.
Email content: compile the emails contents according to your need.
11.2.2. FTP Notification setting
If you want to receive the security notification via FTP, you can configure the
FTP notification on the web interface properly. To configure the configuration
on web Setting > Action > FTP Notification interface.
Parameter set-up:
FTP server: enter the address (URL) of the FTP server for the FTP
notification.
FTP User Name: enter the FTP server user name.
FTP Password: enter the FTP server password.
FTP Path: enter the folder name you created in FTP server.