Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Time and Language Setting
- 6.Network Setting
- 7.Intercom Call Configuration
- 8.Relay Switch Setting
- 9.Door Access Schedule Management
- 10.Door Unlock Configuration
- 10.1.Configure PIN Code for Door Unlock
- 10.2.Configure RF Card for Door Unlock
- 10.3. Configure Door Access Using Configured Files.
- 10.4.Editing the User(s)-specific door access data
- 10.4.1.Unlock by QR Code
- 10.4.2.Unlock by Bluetooth
- 10.4.3.Unlock by HTTP Command on Web Browser
- 10.4.4.Unlock by Exit Button by the Door
- 10.4.5.Unlock by Reception Tab
- 10.4.6.Unlock by DTMF Code
- 10.4.7.Body Temperature Measurement for Door Access(Optio
- 11.Security
- 12.Monitor and Image
- 13.Logs
- 14.Debug
- 15.Firmware Upgrade
- 16.Backup
- 17.Auto-provisioning via Configuration File
- 18.Integration with Third Party Device
- 19.Password Modification
- 20.System Reboot&Reset
- 21.Abbreviations
- 22. Contact Us
E16C Administrator Guide
71
Parameter set-up:
URL: set up tftp
,
http
,
https
,
ftp server address for the provisioning.
User Name: set up a user name if the server needs an user name to be
accessed to otherwise leave it blank.
Password: set up a password if the server needs a password to be
accessed to otherwise leave it blank.
Common AES Key: set up AES code for the intercom to decipher general
Auto Provisioning configuration file.
AES Key (MAC): set up AES code for the intercom to decipher the
MAC-based auto provisioning configuration file.
Note:
AES is one type of encryption, it should be configured only when the
config file is encrypted with AES, otherwise leave the field blank.