Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
96
15.3.Temperature Log
If you want to search and check on temperature log, you can search and
check the logs on the device web interface. Path: Access Control >
Temperature Log
Parameter Set-up:
Save Door Log Enabled: Tick the check box to turn on or turn off the
temperature Log
Save Picture Enabled: enable it if you want to save the temperature
measuring snapshot.
Export Picture Enabled: enable it if you want export the temperature log
with snapshot picture captured.
Time: select the specific time select the specific time span of the
temperature log you want to search, check or export.
Action: click to display the picture captured.
15.4.Export Logs
You can export door logs, call logs and temperature logs if needed. Path:
Advanced > Export Log.