Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

111

112

113

114

115

116

117

118

119

120

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Access the Device Setting on the device
- 5.2.Access the Device Setting on the Web Interface
6.Time and Language Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Device Web Interface.
- 6.2.Time Setting
- 6.4.LCD Screen Brightness Setting
  - 6.4.1.LCD Screen Brightness Setting on the Device
  - 6.4.2.LCD Screen Brightness Setting on the Web Interface
- 6.5.Screen Display configuration
- 6.6.Volume & Tone Configuration
7.Network Setting
- 7.1.Device Network Connection Setting
- 7.2. LTE Wireless Connection Setting
- 7.4.Device Deployment in Network
- 7.5.NAT Setting
8.Intercom Call Configuration
- 8.1.IP call & IP Call Configuration
  - 8.1.1.Make IP/SIP calls
  - 8.1.2.IP Call Configuration
- 8.2.SIP Call &SIP Call Configuration
- 8.3.Dial Options Configuration
  - 8.3.1.Quick Dial by Number Replacement
  - 8.3.2.Quick Dial By Number Replacement on the Device
    - 8.3.2.1.Quick Dial by Number Replacement on the Device
- 8.4.Call Auto-answer Configuration
- 8.5.Call Settings
- 8.6.Configure DTMF Data Transmission
9.Phone Book Configuration
- 9.1.Phone Book Configuration on the Device
- 9.2.Phone Book Configuration on the Web Interface
  - 9.2.1.Manage Contact Groups on the Web Interface
  - 9.2.2. Contact List Configuration on the Web Interface
    - 9.2.2.1.Contact List Display Setting
10.Relay Switch Setting
- 10.1.Relay Switch Setting
- 10.2.DTMF Code Configuration
- 10.3.Web Relay Setting
  - 10.3.1.Configure Web Relay on the Web Interface
  - 10.3.2.Configure Web Relay on the Device
- 10.4.Relay Schedule
11.Door Access Schedule Management
- 11.1. Configure Door Access Schedule
12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
  - 12.4.3.Unlock by NFC
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
  - 12.4.7.1.Body Temperature Measurement Configuration
13.Security
- 13.1.Tamper Alarm Setting
- 13.2.Voice Encryption
- 13.3. Motion Detection
  - 13.3.1.Configure Motion Detection on the Web Interface
  - 13.3.2.Configure Motion Detection on the Device
- 13.4.Security Notification Setting
- 13.5.Web Interface Automatic Log-out
14.Monitor and Image
- 14.1.Mjpeg Image Capturing
- 14.2.Live Stream
- 14.3.RTSP Stream Monitoring
  - 14.3.1.RTSP Basic Setting
  - 14.3.2.RTSP Stream Setting
- 14.4. ONVIF
15.Logs
- 15.1. Call Logs
- 15.2.Door Logs
- 15.3.Temperature Log
- 15.4.Export Logs
16.Debug
- 16.1.System Log for Debugging
- 16.2.PCAP for Debugging
- 16.3.User Agent
17.Firmware Upgrade
18.Backup
19.Auto-provisioning
- 19.1. Configuration Files for Auto-provisioning
- 19.2.AutoP Schedule
- 19.3.PNP Configuration
- 19.4.DHCP Provisioning Configuration
- 19.5.Static Provisioning Configuration
20.Integration with Third Party Device
- 20.1.Integration via Wiegand
- 20.2. Integration via RS485
- 20.3. OSDP Setting
- 20.4.Integration via HTTP API
- 20.5.Power Output Control
21.Password Modification
22.System Reboot&Reset
- 22.1.Reboot
- 22.2.Reset
23.Abbreviations
24.FAQ
25. Contact Us

E18C Door Phone Administrator Guide

106

19.2.AutoP Schedule

Akuvox provides you with different Autop methods that enable the door

phone to perform provisioning for itself in a specific time according to your

schedule. Path: Upgrade > Advanced > Automatic Autop.

Parameter Set-up:

 Power On: select “Power on”, if you want the device to perform Autop

every time it boots up.

 Repeatedly: select “ Repeatedly”, if you want the device to perform autop

according to the schedule you set up.

 Power On + Repeatedly: select “Power On + Repeatedly” if you want to

combine Power On Mode and Repeatedly mode that will enable the

device to perform Autop every time it boots up or according to the

schedule you set up.

 Hourly Repeat: select “Hourly Repeat” if you want the device to perform

Autop every hour.

19.3.PNP Configuration

Plug and Play (PNP) is a combination of hardware and software support that

enables a computer system to recognize and adapt to hardware

configuration changes with little or no intervention by a user. Path:

configuration on web Upgrade > Advanced > PNP Option .