Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
107
19.4.DHCP Provisioning Configuration
Auto-provisioning URL can also be obtained using DHCP option which allows
device to send a request to a DHCP server for a specific DHCP option code. If
you wan to use Custom Option as defined by users with option code range
from 128-255), you are required to configure DHCP Custom Option on the
web interface. Path: Upgrade > Advanced > DHCP Option.
Note:
The custom Option type must be a string. The value is the URL of
TFTP server.