Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
109
protocols that can be used for upgrading the device firmware and
configuration. Path:Upgrade > Advanced > Automatic Autop.
Parameter set-up:
URL: set up tftp，http，https，ftp server address for the provisioning.
User Name: set up a user name if the server needs an user name to be
accessed to otherwise leave it blank.
Password: set up a password if the server needs a password to be
accessed to otherwise leave it blank.
Common AES Key: set up AES code for the intercom to decipher general
Auto Provisioning configuration file.
AES Key (MAC): set up AES code for the intercom to decipher the
MAC-based auto provisioning configuration file.
Note:
AES is one type of encryption, it should be configured only when the
config file is encrypted with AES, otherwise leave the field blank.