Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
115
NO.
Authorization
Mode
Description
1
None
No authentication is required for HTTP API as
it is only used for demo testing.
2
Normal
This mode is used by Akuvox developer only.
3
WhiteList
If this mode is selected, you are only required
to fill in the IP address of the third party
device for the authentication. The whitelist is
suitable for operation in the LAN.
4
Basic
If this mode is selected, you are required to fill
in the User name and the password for the
authentication.In Authorization field of HTTP
request header, use Base64 encode method to
encode of username and password.
5
Digest
Password encryption method, only supports
MD5. MD5( Message-Digest Algorithm)
In Authorization field of Http request header:
WWW-Authenticate:Digest
realm="HTTPAPI",qop="auth,auth-int",nonce="
xx", opaque="xx".
6
Token
This mode is used by Akuvox developer only.