Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

125

126

127

128

129

130

131

132

133

134

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Access the Device Setting on the device
- 5.2.Access the Device Setting on the Web Interface
6.Time and Language Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Device Web Interface.
- 6.2.Time Setting
- 6.4.LCD Screen Brightness Setting
  - 6.4.1.LCD Screen Brightness Setting on the Device
  - 6.4.2.LCD Screen Brightness Setting on the Web Interface
- 6.5.Screen Display configuration
- 6.6.Volume & Tone Configuration
7.Network Setting
- 7.1.Device Network Connection Setting
- 7.2. LTE Wireless Connection Setting
- 7.4.Device Deployment in Network
- 7.5.NAT Setting
8.Intercom Call Configuration
- 8.1.IP call & IP Call Configuration
  - 8.1.1.Make IP/SIP calls
  - 8.1.2.IP Call Configuration
- 8.2.SIP Call &SIP Call Configuration
- 8.3.Dial Options Configuration
  - 8.3.1.Quick Dial by Number Replacement
  - 8.3.2.Quick Dial By Number Replacement on the Device
    - 8.3.2.1.Quick Dial by Number Replacement on the Device
- 8.4.Call Auto-answer Configuration
- 8.5.Call Settings
- 8.6.Configure DTMF Data Transmission
9.Phone Book Configuration
- 9.1.Phone Book Configuration on the Device
- 9.2.Phone Book Configuration on the Web Interface
  - 9.2.1.Manage Contact Groups on the Web Interface
  - 9.2.2. Contact List Configuration on the Web Interface
    - 9.2.2.1.Contact List Display Setting
10.Relay Switch Setting
- 10.1.Relay Switch Setting
- 10.2.DTMF Code Configuration
- 10.3.Web Relay Setting
  - 10.3.1.Configure Web Relay on the Web Interface
  - 10.3.2.Configure Web Relay on the Device
- 10.4.Relay Schedule
11.Door Access Schedule Management
- 11.1. Configure Door Access Schedule
12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
  - 12.4.3.Unlock by NFC
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
  - 12.4.7.1.Body Temperature Measurement Configuration
13.Security
- 13.1.Tamper Alarm Setting
- 13.2.Voice Encryption
- 13.3. Motion Detection
  - 13.3.1.Configure Motion Detection on the Web Interface
  - 13.3.2.Configure Motion Detection on the Device
- 13.4.Security Notification Setting
- 13.5.Web Interface Automatic Log-out
14.Monitor and Image
- 14.1.Mjpeg Image Capturing
- 14.2.Live Stream
- 14.3.RTSP Stream Monitoring
  - 14.3.1.RTSP Basic Setting
  - 14.3.2.RTSP Stream Setting
- 14.4. ONVIF
15.Logs
- 15.1. Call Logs
- 15.2.Door Logs
- 15.3.Temperature Log
- 15.4.Export Logs
16.Debug
- 16.1.System Log for Debugging
- 16.2.PCAP for Debugging
- 16.3.User Agent
17.Firmware Upgrade
18.Backup
19.Auto-provisioning
- 19.1. Configuration Files for Auto-provisioning
- 19.2.AutoP Schedule
- 19.3.PNP Configuration
- 19.4.DHCP Provisioning Configuration
- 19.5.Static Provisioning Configuration
20.Integration with Third Party Device
- 20.1.Integration via Wiegand
- 20.2. Integration via RS485
- 20.3. OSDP Setting
- 20.4.Integration via HTTP API
- 20.5.Power Output Control
21.Password Modification
22.System Reboot&Reset
- 22.1.Reboot
- 22.2.Reset
23.Abbreviations
24.FAQ
25. Contact Us

E18C Door Phone Administrator Guide

123

24. FAQ

Q1: How to obtain IP address of R2X

A1: ✔ For devices with single button - E21/ R20/ R23/ R26:

While E21/ R20/ R23/ R26 power up normally, hold the call button for 5

seconds after the statue LED turns blue and it will enter into IP

announcement mode. In announcement mode, the IP address will be

announced repeatedly. Press call button again to quit the announcement

mode.

✔ For devices with multiple numeric keyboard - R27:

While R27 power up normally, press “*2396#” to enter home screen and

press “1” to go to system Information screen to check the IP address.

✔ For devices with touch screen - R29:

While R29 power up normally, in the dial interface, press “9999“, “Dial key”,

“3888” and “OK” to enter the system setting screen. Go to info screen to

check the IP address.

✔Common method:

Using Akuvox IP Scanner to search Akuvox devices in the same LAN network.

Q2: Do Akuvox devices support opus codec?

A2: For now, only Akuvox Android video IP phone R48G can support Opus

audio codec.

Q3: What is the supported temperature range for akuvox doorphone?

A3: R20/E21/R26/R23/Standard R27/Standard R29 -- 14° to 112°F (-10° to

45°C)

R27/R29 with heating supporting --- 40 degrees

R28 -- (-40°C~55°C )

Indoorphone -- 14° to 112°F (-10° to 45°C)

IPPhone -- 32º~104ºF(0~40ºC)