Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
14
6.3. LED Setting
6.3.1. Configure Card Reader LED Setting
You can enable or disable the LED lighting on the card reader area as needed
on the web interface. Meanwhile, If you do not want to have the LED light on
the card reader area to stay on, you can also set the timing for the exact time
span during which the LED light can be disabled in order to reduce the
electrical power consumption. Path: Device > Light > LED of Swiping Card
Area.
Parameter set-up:
Enabled: Tick the check box if want to enable the card reader LED lighting
and vice versa.
Start Time - End Time (H): enter the time span for the LED lighting to be
valid, e.g. if the time span is from 18-22 it means LED light will stay on
during the time span from 6:00 pm to 10:00 pm during one day (24
hours).
Note:
When the check box is unticked , the parameters related to NTP
server will become uneditable.