Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
15
6.3.2. Configure LED White Light Setting
LED White light is used to reinforce the lighting for facial recognition as well
as for the QR code access as needed in the dark environment. You can set
the white light function properly on the device web interface. Path: Device >
Light > White Light.
Parameter Set-up:
Mode: select “Auto” or “OFF”. If you select “ Auto” then the white light will
turn on for 5 minutes for facial recognition and QR code scan. And if you
select “Off” then the white light will be turned off.
Max White Light Value: set the white light value from 1-5, and the default
white light value is “3”. The greater value it is, the brighter the light will
be.
Note:
IR LED light should be triggered first before the white light can be
valid in the facial recognition, however IR LED light does not need to
be triggered for the white light function in the QR code scan.