Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
19
6.5.4.Customize Screensaver on the Web Interface
You can upload and customize screensaver pictures separately or in batch to
the device and to the device web interface for publicity purpose or for a
greater visual experience.You are allowed to upload a maximum of 5 pictures,
and each picture will be displayed in rotation according to the ID order with
specific time duration (Time Interval ) you set. You can go to Device > LCD >
Upload Screensaver.
Parameter Setup:
Interval(Sec): Set the display time of each individual picture you
uploaded in Interval (Sec.) the display time range is from “1-120”
seconds.The default setting is 5 seconds.
Note:
The pictures uploaded should be in JPG format with 2M pixel
maximum.