Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
20
6.5.5.Home Screen Configuration
You can change the home screen display through the configuration of tab
name and tab arrangement on the device web interface if needed. Path:
Device > LCD > Key In Homepage Of The Building Theme.
Parameter Set-up:
Type: select the tab type corresponding to the index number which
indicates the tab position. For example, if you want to make Speed Dial
tab to be displayed in position one, you can change the type in index
number 1 to Speed Dial. And you can change another tab position
accordingly.
Name: enter a new name to replace the original type of name, but it does
not change the attribute of the type.
Value: enter the IP or SIP number to be attached to the reception icon for
the speed dial. The number enter will be dialed out as you press the
reception icon on the home screen. This field is only valid for speed dial.