Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
22
Mic Volume: adjust the microphone volume according to your need.
Speaker volume: adjust the loudspeaker volume according to your need.
Prompt Volume: adjust the prompt volume, which includes various types
of prompt sound for door open success and failure, ringback, and
temperature measurement sound etc.
6.6.1.2. Configure Volume on the Web Interface
On the web interface, you can set the temper alarm volume, Mic volume,
speaker volume, prompt volume. Path: Device > Audio > Volume Control.
Parameter Setup:
Mic Volume: set the mic volume from 0-15 according to your need. The
default Mic volume is “8”.
Speaker Volume: set the speaker volume from 0-15 according to your
need. The default speaker volume is “8”..
Tamper Alarm Volume: set the tamper alarm volume from 0-15 according
to your need. The default volume is “8”.
Prompt Volume: adjust the prompt volume, which includes various types
of prompt sound for door open success and failure, ringback, and
temperature measurement sound etc.
Tamper Alarm Volume: set the tamper alarm volume from 0-15 according