Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
25
7.
Network Setting
7.1. Device Network Connection Setting
You can configure the default DHCP mode (Dynamic Host Configuration
Protocol) and static IP connection. More over, you can set up IP address,
Subnet Mask, Default Gateway, and DNS servers.
Parameter Set-up:
DHCP: select the DHCP mode by moving the toggle switch to the right.
DHCP mode is the default network connection. If the DHCP mode is
turned on, then the door phone will be assigned by the DHCP server with
IP address, subnet mask, default gateway, and DNS server address
automatically.
Static IP: select the static IP mode by checking off the DHCP check box.
When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address have to be manually
configured according to your actual network environment.
IP Address: set up the IP Address if the static IP mode is selected.
Subnet Mask: set up the subnet Mask according to your actual network