Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
35
Account Enabled: tick the checkbox to enable or disable registered SIP
account.
Display Name: configure the name, for example the device’s name to be
be shown on the device being called to. You can fill in 63 bytes of
characters in length maximum
Display Label: configure the device label to be shown on the device
screen.You can fill in 63 bytes of characters in length maximum
Register Name: enter the SIP account register Name obtained from the
SIP account administrator. You can fill in 63 bytes of characters in length
maximum.
User Name: enter the user name obtained from SIP account
administrator. You can fill in 63 bytes of characters in length maximum
Password: enter the password obtained from the SIP account
administrator.You can fill in 63 bytes of characters in length maximum.
8.2.2.SIP Server Configuration
You are required to enter the SIP port for the device’s SIP account
registration and for SIP calls.Path: Account > Basic > Preferred SIP Server