Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
52
Mode: select DTMF type among five options: “ Inband”, “ RFC2833”,
“ Info+Inband” and “Info+RFC2833” according to you need.
DTMF Code Transport format: select among four options: “Disable”
“ DTMF” “DTMF-Relay” “Telephone-Event” according to your need.
Payload: select the payload 96-127 for data transmission identification.
The default payload is 101.
Note:
Please refer to the chapter Configure DTMF Data Transmission for
the specific DTMF code setting.
Intercom devices involved must be consistent in the DTMF type
otherwise DTMF code cannot be applied.
10.3.Web Relay Setting
In additional to the relay that is connected to the device, you can also control
the door access using the network-based web relay on the device and on the
device web interface.
10.3.1. Configure Web Relay on the Web Interface
Web relay needs to be set up on the web interface where you are required to
fill in such information as relay IP address, password. And you can fill in a
maximum of 50 web relay action commands for different web relay actions,
which can later selected on the device screen for the specific relay action for