Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
72
Enabled: enable or disable the Bluetooth function. Bluetooth is turned off
by default.
Rssi Threshold: select the signal receiving strength from -85~-50db in
absolute terms. The higher value it is, the greater strength it has. The
default value is 72db in absolute terms.
Open Door Interval: select the time interval between the every two
Bluetooth door accesses.
12.4.3. Unlock by NFC
You can also gain the door access by mobile phone with NFC which is used
together with Akuvox SmartPlus. You can keep the mobile phone closer to
the door phone for the door access. Path: Access Control > Card Setting>
NFC
Parameter Set-up:
Enable: enable the NFC function if you want to unlock the door via NFC.
12.4.4. Unlock by HTTP Command on Web Browser
You can unlock the door remotely without approaching the device physically
for the door access by typing in the created the HTTP command (URL) on the
web browser to trigger the relay when you are not available by the door for
the door access. Path: Access Control > Relay > Open Relay via HTTP.