Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
73
Parameter Set-up:
Enable: enable the HTTP command unlock function by clicking on Enable
field.
User Name: enter the user name of the device web interface, for example
“Admin”.
Password: enter the password for the HTTP command. For example :
“12345”.
Please refer to the following example:
http://192.168.35.127/fcgi/do?action=OpenDoor&UserName=admin&Passw
ord=12345&DoorNum=1
Note:
DoorNum in the HTTP command above refers to the relay number
#1 to be triggered for the door access.
12.4.5. Unlock by Exit Button by the Door
When you need to open the door from inside using the exit button installed by
the door, you can configure the device’s Input to trigger the relay for the door
access. Path: Access Control > Input > Input.