Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
75
Parameter Set-up:
Reception Enabled: Tick the check box to enable the function.
Name: enter the name for the Reception icon on the home screen.
Number: enter the SIP/IP number to be called to after pressing the
Reception icon for the door access.
12.4.7. Body Temperature Measurement for Door
Access
E18C provide you with an optional body temperature measurement function
designed to be applied in the situation where the measurement becomes
necessary for the safety of the residents and visitors etc. Residents and
visitors are required to go through temperature measurement along with
optional mask detection check before they are allowed for the door access.
12.4.7.1. Body Temperature Measurement
Configuration
You can configure the body temperature measurement function in terms of
defining the normal temperature as well as making schedule for the validity