Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronicsDoor Phone

100

Table Of Contents

1.Product Overview
2.Change Log
3.Model Specification
4.Introduction to Configuration Menu
5.Access the Device
- 5.1.Access the Device Setting on the device
- 5.2.Access the Device Setting on the Web Interface
6.Time and Language Setting
- 6.1.Language Setting
  - 6.1.1. Language Setting on the Device
  - 6.1.2. Language Setting on the Device Web Interface.
- 6.2.Time Setting
- 6.4.LCD Screen Brightness Setting
  - 6.4.1.LCD Screen Brightness Setting on the Device
  - 6.4.2.LCD Screen Brightness Setting on the Web Interface
- 6.5.Screen Display configuration
- 6.6.Volume & Tone Configuration
7.Network Setting
- 7.1.Device Network Connection Setting
- 7.2. LTE Wireless Connection Setting
- 7.4.Device Deployment in Network
- 7.5.NAT Setting
8.Intercom Call Configuration
- 8.1.IP call & IP Call Configuration
  - 8.1.1.Make IP/SIP calls
  - 8.1.2.IP Call Configuration
- 8.2.SIP Call &SIP Call Configuration
- 8.3.Dial Options Configuration
  - 8.3.1.Quick Dial by Number Replacement
  - 8.3.2.Quick Dial By Number Replacement on the Device
    - 8.3.2.1.Quick Dial by Number Replacement on the Device
- 8.4.Call Auto-answer Configuration
- 8.5.Call Settings
- 8.6.Configure DTMF Data Transmission
9.Phone Book Configuration
- 9.1.Phone Book Configuration on the Device
- 9.2.Phone Book Configuration on the Web Interface
  - 9.2.1.Manage Contact Groups on the Web Interface
  - 9.2.2. Contact List Configuration on the Web Interface
    - 9.2.2.1.Contact List Display Setting
10.Relay Switch Setting
- 10.1.Relay Switch Setting
- 10.2.DTMF Code Configuration
- 10.3.Web Relay Setting
  - 10.3.1.Configure Web Relay on the Web Interface
  - 10.3.2.Configure Web Relay on the Device
- 10.4.Relay Schedule
11.Door Access Schedule Management
- 11.1. Configure Door Access Schedule
12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
  - 12.4.3.Unlock by NFC
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
  - 12.4.7.1.Body Temperature Measurement Configuration
13.Security
- 13.1.Tamper Alarm Setting
- 13.2.Voice Encryption
- 13.3. Motion Detection
  - 13.3.1.Configure Motion Detection on the Web Interface
  - 13.3.2.Configure Motion Detection on the Device
- 13.4.Security Notification Setting
- 13.5.Web Interface Automatic Log-out
14.Monitor and Image
- 14.1.Mjpeg Image Capturing
- 14.2.Live Stream
- 14.3.RTSP Stream Monitoring
  - 14.3.1.RTSP Basic Setting
  - 14.3.2.RTSP Stream Setting
- 14.4. ONVIF
15.Logs
- 15.1. Call Logs
- 15.2.Door Logs
- 15.3.Temperature Log
- 15.4.Export Logs
16.Debug
- 16.1.System Log for Debugging
- 16.2.PCAP for Debugging
- 16.3.User Agent
17.Firmware Upgrade
18.Backup
19.Auto-provisioning
- 19.1. Configuration Files for Auto-provisioning
- 19.2.AutoP Schedule
- 19.3.PNP Configuration
- 19.4.DHCP Provisioning Configuration
- 19.5.Static Provisioning Configuration
20.Integration with Third Party Device
- 20.1.Integration via Wiegand
- 20.2. Integration via RS485
- 20.3. OSDP Setting
- 20.4.Integration via HTTP API
- 20.5.Power Output Control
21.Password Modification
22.System Reboot&Reset
- 22.1.Reboot
- 22.2.Reset
23.Abbreviations
24.FAQ
25. Contact Us

E18C Door Phone Administrator Guide

To configure the web interface time-out, you can do as follows:

Parameter Setup:

 Session Time Out Value: set the automatic web interface logout timing

ranging from 60 seconds to 14400 seconds. The default value is 300.