Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Model Specification
- 4.Introduction to Configuration Menu
- 5.Access the Device
- 6.Time and Language Setting
- 7.Network Setting
- 8.Intercom Call Configuration
- 9.Phone Book Configuration
- 10.Relay Switch Setting
- 11.Door Access Schedule Management
- 12.Door Unlock Configuration
- 12.1.Configure PIN Code for Door Unlock
- 12.2.Configure RF Card for Door Unlock
- 12.3. Configure Door Access Using Configured Files.
- 12.4.Edit the User(s)-specific door access data
- 12.4.1.Unlock by QR Code
- 12.4.2.Unlock by Bluetooth
- 12.4.4.Unlock by HTTP Command on Web Browser
- 12.4.5.Unlock by Exit Button by the Door
- 12.4.6.Unlock by Reception Tab
- 12.4.7.Body Temperature Measurement for Door Access
- 13.Security
- 14.Monitor and Image
- 15.Logs
- 16.Debug
- 17.Firmware Upgrade
- 18.Backup
- 19.Auto-provisioning
- 20.Integration with Third Party Device
- 21.Password Modification
- 22.System Reboot&Reset
- 23.Abbreviations
- 24.FAQ
- 25. Contact Us
E18C Door Phone Administrator Guide
89
14.3.RTSP Stream Monitoring
E18C supports RTSP stream that allows intercom devices such as indoor
monitor or the monitoring unit from the third party to monitor or obtain the
the real time audio/ video (RTSP stream) from the door phone using the
correct URL.
14.3.1. RTSP Basic Setting
You are required to set up RTSP function in terms of RTSP Authorization,
authentication and password etc., before you are able to use the function.
Path: Surveillance > RTSP > RTSP Basic
Parameter Set-up:
Enabled: Tick the check box to to turn on or turn off the RTSP function.
Authorization Enabled: Tick the check box to enable the RTSP
authorization. If you enable the RTSP Authorization, you are required to
enter RTSP Authentication Type, RTSP Username, RTSP Password on the
intercom device such as indoor monitor for authorization.
RTSP Authentication Type: select RTSP authentication type between
“ Basic” and “ Digest”. “Basic “ is the default authentication type.