User Guide

4. AdvanceSettings
① Press the icon in settings interface, enter the
password(123456 by default) and press Confirm to
enter the advance settings interface.
4.1. Networksettings
② Press this icon to enter network settings interface.
IT82A(869) use DHCP mode to obtain IP address by default.
③ Tick the DHCP option to select DHCP network of
IT82A(869).
④ Uncheck the DHCP option to select Static IP network of
IT82A(869).
⑤ ⑥ If you select Static IP Network, please enter the IP
address parameters in the corresponding area: IP
Address/Subnet Mask/Gateway/DNS1/DNS2(Back up DNS
address).