User Guide


14
2.6. Arming
Tap Arming to enter the Arming interface. Arming feature is not
displayed by default. Users can ask administrator to enable it.
Please refer to chapter 3.4.10.
IT83X supports 4 modes, including Home mode, Night mode,
Away mode and Disarmed mode.
2.6.1. Arming Mode
Go to Arming- Arming mode. Users can see all of the 8 zones
andcorresponding sensor types. Slide down to check more
informationin this interface.
z Adjust Defence delay time. It means when users change the
arming mode from other modes, there will be 90 seconds delay
time to get activated.
z To setup the Alarm delay. It means when thesensor triggered,
Figure2.6-1 Arming
Figure2.6.1-1 Arming mode